Brand:
PreView
Origin: USA
Click for:
The double antennas provide the close-in detection needed to protect objects very close to the bumper of the vehicle, while simultaneously detecting objects as far away as 20 ft/6m without dramatically increasing the width of the detection pattern. Additionally, WorkSight PreView® will work as a single-sensor system for directly behind the vehicle, or networks together in a multi-sensor network system to provide both front and rear detection for larger vehicles.
- Decrease blind zone accidents
- Dual antennas for flexible ranging
- Detection beam supports narrow applications
Made for Heavy Equipment
This is not an automotive-grade ultrasonic technology posing as a heavy equipment solution. WorkSight PreView® is powered by our patented pulsed radar technology. Simply put, it detects objects in the most extreme weather and working conditions – the conditions that heavy equipment and vehicles must maneuver through daily. PreView® is real safety for real equipment.
PreView® WorkSight for Waste Features & Benefits ▲
- Rugged sensor detects objects in extreme conditions
- In-cab warning allows drivers to react faster
- Narrow detection pattern reduces nuisance alarms
- Close-in resolution provides better bumper coverage
- Allows for single or multi-sensor configuration
- Integrates with other safety tools
PreView® WorkSight for Waste Specifications ▲
| Detection Ranges | 20 feet (6M), 15 feet (4.5M), 10 feet (3M) |
| Warning Ranges | 5 zones |
| Transmitter | Pulsed RF transmitter at 5.8GHz operating under FCC Part 15.249 |
| Voltage | 9-33VDC |
| Electronics | Solid state |
| Current Draw | 0.2 amp maximum, inrush current limited to 1A |
| Vibration | 25G RMS all three axes |
| Shock | 25G all three axes |
| IP Rating | IP67 (encapsulated to protect from dust and moisture) |
| Operating Temperature | -40°F/-40°C to +185°F/+85°C |
| Compliance | Compliant with FCC Part 15.249 (5725-5875MHz). FCC ID: OXZWZPV2009 ‘CE’ ‘E’ mark E11 10R-035418 |
| Data Update Rate | 70 MS |
| Polarity | Negative ground, Polarity protected to 150V |
| Transient Spike Protection | Over voltage protected to 150V |
| Housing Material | Polycarbonate radome |
| Sensor Dimensions | 4.4”H x 10.5"W x 1.4"D (11.2cm x 26.7cm x 3.6cm) |
| Display Dimensions | 1.00”H x 2.25"W x 2.00"D (2.5cm x 5.7cm x 5.1cm) |
| Sensor Weight | 2.3 lb. (1.04 kg) |
| Display Weight | 0.25 lb. (0.11 kg) |
| Sensor Mount | Four 0.25" (6.4mm) diameter holes on 8.54”, Horizontal centers and 2.00” vertical centers. Unit is supplied with #10 SS screws for mounting purposes. Recommended torque is 22 inch-lbs. |
| Display Mount | User dependent |
| Compatible With | PrecoNet Service Tool |
| System Components | WorkSight PreView® Sensor(s), In-cab display unit, Cable system to connect the sensor and display |
PreView® WorkSight for Waste Specifications Flyer (PDF) ▲
Manuals
Installation Guide
- WorkSight PreView® for Waste Installation Guide
- WorkSight PreView® for Waste – Rear Loader Installation Guide
- WorkSight PreView® for Waste – Front & Side Loader Installation Guide
- WorkSight PreView® for Waste – with PreView Plus Monitor Installation Guide
- WorkSight PreView® for Waste – with PreView Plus Monitor & SAS Installation Guide
- WorkSight PreView® for Waste – with VideoLink Front & Side Installation Guide
Vehicle Types
